[The logo is protected from the company]

Cameron International Corporation

Cameron is a leading provider of flow equipment products, systems and services to worldwide oil, gas and process industries. Leveraging its global manufacturing, engineering and sales and service network, Cameron works with drilling contractors, oil & gas producers, pipeline operators, refiners and other process owners to control, direct, adjust, process, measure and compress pressures and flows.  Read More

Address      1333 West Loop South Suite 1700 Houston, TX 77027
Website      www.c-a-m.com/
Holding      No Holding Details

View Company Page
Apply to job

Oil Tools Systems Engineer

System engineers are allocated to major subsea systems projects to ensure that all requirements of the customer specifications are met. Two systems engineers are generally required for a major project, a Controls Systems and an Oil Tool Systems engineer. Between the two engineers the full requirements of the project from a system perspective will be covered. Systems engineers will be allocated to a project from concept through to the first phase of installation as a minimum.
The system engineers will work with the technical manager for the particular project who will give them daily direction. System engineers will act on behalf of the project technical manager whenever the need arises

1. Responsible for ensuring the components that comprise the subsea system function together to meet the system requirements. Typical components include: Subsea Trees, Tubing Hangers and Related Running Tools, Manifolds, Valves, Jumpers and Connectors, Foundation Structures. The oil tool system engineer will work closely with the individual package engineers for the disciplines outlined above.
2. External Interfaces
a. Work in close harmony with the External Interface Manager, for the particular subsea project, to ensure that all external interfaces are considered and duly closed out.
3. Internal Interfaces
a. Coordinate with the Internal Interface engineer to ensure all internal interfaces are properly managed.
4. Design Basis Memorandum
a. Responsible for the preparation and generation of the Design Basis Memorandum in conjunction with the Control System Engineer.
b. Review and critique Functional Design Specifications from the individual package engineers.
5. Design Reviews
a. Responsible for directing and coordinating the system design review in conjunction with the Control System Engineer
b. Ensure that the package engineer design reviews meet the requirements of the Design Basis Memorandum.
c. Maintain design review action register in conjunction with Control System Engineer.
6. Preparation of System Documents such as: -
a. Project system procedures and plans.
b. System P&ID’s.
c. System block diagrams
d. System drawing list
7. Risk Assessment, HAZOP’s etc.
a. Help coordinate the necessary reviews in conjunction with the project HSE manager and the Control system engineer.
b. Ensure closure of any actions arising from the reviews pertaining to engineering requirements.
8. Materials
a. Generate the material list matrix for the project in conjunction with the Control System engineer and the metallurgy department.
b. Manage and coordinate the preparation of the Materials Design Memorandum in regard to the Subsea Tree, Manifolds, Jumpers and Foundations, by the project metallurgy engineer.
9. Soil Analysis
a. Manage and coordinate the analysis work undertaken to verify the foundation structures.
b. Work closely with foundation engineer to review and develop detailed foundation specifications to meet the project requirements.
10. Flow Assurance
a. Manage and coordinate the analysis work undertaken to meet project flow assurance requirements.
b. Provide information to allow the thermal analysis to be undertaken, if required. Manage the timely conclusion of this analysis
c. Review the system with the flow assurance specialists to ensure compatibility with hydrate prevention strategy, chemical injection requirements, effects of slugging etc.
11. Riser analysis
a. Manage and coordinate the timely conclusion of any BOP riser analysis work required to support the design of the jumper system. Confirm the wellhead and mating tree connector loading is maintained within the wellhead and connector limitations.
12. Reliability, Availability. Maintainability (RAM)
a. Assist the Control system engineer in providing relevant information for the RAM study.
13. CTR’s
a. Generate and populate the CTR database for System engineering in conjunction with the Control system engineering.
b. Review and ensure consistency of the package engineers CTR’s.
14. Cathodic Protection (CP)
a. Manage the completion of the CP study in conjunction with the Control system engineer. Ensure that electrical continuity and satisfactory earthing requirements are being considered across the entire project.
b. Provide input parameters for CP calculations in compliance with project specifications.
15. Project Testing Regime
a. Ensure project testing requirements are being met by generating a project test matrix in conjunction with the Control system engineer.
b. Develop and maintain a list of qualification test plans and requirements for the project.
c. SIT – ensure system requirements are met and fully verified
d. SIT – manage the generation of the subsea tree, manifold, jumpers and foundation SIT procedures by the package engineers.
e. Ensure all SRT, Pre-shipment, storage procedures are completed by the relevant package engineers.
16. Operation, Installation and Maintenance
a. Generate the system O&M manual in conjunction with the Control system engineer.
b. Review installation procedures.
c. Ensure interfaces relating to installation are worked properly and closed out.
d. Review operating procedures.
e. Conduct ROV accessibility study.
f. Review spare parts list.
17. Project Close-Out
a. Provide input for project close out report.
b. Attend all lessons learned meetings, assist with preparation of lessons learned report.
Job Requirements/ Qualifications    BS or MS degree in Electrical Engineering or similar technical field and 5+ years experience.

Broad product knowledge

Knowledge of industry codes and standards (e.g. API, ISO, etc

Thorough knowledge of control systems and a keen understanding of their impact of changes in other parts of the subsea system and umbilicals.

Experience on offshore systems projects or EPC contracts

Other Job Information

Vacancy type:

Full Time

Contact Mode:

not provided

Fax:

713.513.3456

Contact Name:

not provided

Job Duration:

not provided

Phone:

713.513.3300

Email:

not provided

News - Cameron International Corporation

Related Jobs

Systems Engineer

As a knowledge-based public listed company, we believe t ...   [more]

Support Engineer I

<table style="width: 100%;" border="0" cellpadding="0 ...   [more]

Solutions Engineer HS

OverviewThe Solutions Engineer consults for both large a ...   [more]

Services Support Admin RS

This highly visible position is responsible for systemat ...   [more]

Systems Engineer

Summary:Individual will be responsible for helping the d ...   [more]

Senior Programming Executive

The NCM Fathom Consumer division is responsible for deve ...   [more]

Senior Software Engineer

Netflix is the world's leading streaming video service, ...   [more]

Custom Design Engineering

      Job DescriptionThe Silicon Platform Architect is a ...   [more]

Expand

Collapse